The Flexible Light will not stretch like ordinary rubber. If forcefully Extended, the interior circuits will become disconnected.

	If the leading wire is pulled forcefully, the wiring may become disconnected.

	When creating angles, please use the spaces between the bulbs. If at all possible, please avoid unworkable angles.

	If the LED Flexible Lights are to be inserted into channels such as an aluminium channel, insert by applying force equally throughout the light.

	If the force is exerted unevenly, the inner circuit may break.

	Waterproof IPX7 is not warrantable when using it cutting it. Please do and use the waterproof processing.

	The body is covered in silicone, but if this is going to be attached to other materials such as plastic, glass, or iron plates, use appropriate adhesives or channels(sold separately).

	For attachment, apply a surface primer (Loctite® 770) to both LED Flexible Light and the other surface using a brush to get rid of dust and oil.

	Apply instant adhesive (Loctite® 401) to LED Flexible Light adhesion area then attach to chosen surfaceand hold for within a minute.

	If attaching a channel to LED Flexible Light, fix the channel aa beforehand by using nails or adhesives then insert the LED Flexible Light. Fix by included spring.

You may view basic facts on handling and controlling LED Flexible Lights in the HP and PDF files.
In addition, most frequently asked questions, information on power supply and installation materials can also be viewed in PDF files.
[NOTE] You will need Adobe® Reader® to view PDF files.