| Q1 | How are LED Flexible Lights controlled ? |
|---|---|
| A1 | LED Flexible Lights can be controlled to provide continuous lighting (stay lit) orflashing light. Brightness adjustment is also available. |
| Q2 | Is the flashing interval of an LED Flexible Light adjustable via the control unit ? |
| A2 | Yes. Flashing interval is adjustable. |
| Q3 | When an LED Flexible Light is to be used in the continuous lighting condition, is it possible to connect it directly to 100V AC without an LED Flexible Light control unit? |
| A3 | No. It cannot be connected directly to 100V AC. It is rated at 12V DC. |
| Q4 | Is the control unit usable with 200V AC ? |
| A4 | We can provide a control unit usable with 200V AC (special specifications). Delivery to the customer takes slightly longer than for the standard control unit. |
| Q5 | Is it possible to install the control unit outdoors ? |
| A5 | The control unit can be installed outdoors only on the condition that it is protected (e.g. by a box) against rain, wind, etc, and that condensation is prevented. (Be sure to prevent condensation.) |
| Q6 | Is it possible to make On and Off portions within one unit of aaaLED Flexible Light ? |
| A6 | No, it is not possible. One unit of LED Flexible Light is the unit of lighting. Therefore, it is necessary to combine shorter units of LED Flexible Light in order to make On and Off portions within a desired length. The lengths of LED Flexible Light units available are listed in the table below. |
| Product Number | Length(mm) |
|---|---|
| FL10-96 | 965 both leads |
| FL10-72 | 725 both leads |
| FL10-48 | 485 both leads |
| FL10-24 | 245 both leads |
| FL10-12 | 125 one-side leads |
Copyright(C)2009 ATEX Co.,Ltd ,All Right ReservedC